|
Post by RJMyers on Sept 10, 2012 18:00:35 GMT 10
Hi Guru, mate can you tell me what tooth pinion you run for the 2900kv Tacon brushless ?
|
|
|
Post by GURU on Sept 11, 2012 6:08:34 GMT 10
Hi Guru, mate can you tell me what tooth pinion you run for the 2900kv Tacon brushless ? 20 tooth mate.
|
|
outside
Full Member
"i didnt see a thing"
Posts: 194
|
Post by outside on Sept 11, 2012 12:25:41 GMT 10
what pith are the pinions 48 ?
|
|
|
Post by RJMyers on Sept 11, 2012 15:36:55 GMT 10
How do you work this out ? Is it lower the motor rating the higher the pinion because the output 220 watts is the same or do you have to go off the 'T' being turns or torque ?
|
|
|
Post by GURU on Sept 11, 2012 15:55:10 GMT 10
We tested it on the track and also with brushless motors if you run higher teeth it makes the motor rev more .And we worked out that it would be very close to the 3400kv with a 17th. Yes Len there 48 pitch.
|
|
outside
Full Member
"i didnt see a thing"
Posts: 194
|
Post by outside on Sept 13, 2012 14:00:10 GMT 10
cool and the shaft size is 2mm yes?
|
|