|
motor
Apr 17, 2012 21:25:07 GMT 10
Post by GURU on Apr 17, 2012 21:25:07 GMT 10
Thanks Guru, no worries, that would be great if you could do that. Also mate does the ESC need to be programmed with that red button or would that already be done from factory ? Cheers Rick. It may have basic programming but we will put a program card on it and adjust all the profiles.
|
|
|
motor
Apr 17, 2012 21:40:45 GMT 10
Post by RJMyers on Apr 17, 2012 21:40:45 GMT 10
Thanks Guru, I just hooked it up then to crank it over and it looks like the rear end bearing opposite end from wires on motor, it looks like the shaft is slipping on bearing ? funny noise coming out of motor until you hold that bearing then noise goes away ? I don't know if this is normal or if it makes any difference to the running of the motor.
|
|
|
motor
Apr 19, 2012 7:20:12 GMT 10
Post by GURU on Apr 19, 2012 7:20:12 GMT 10
Thanks Guru, I just hooked it up then to crank it over and it looks like the rear end bearing opposite end from wires on motor, it looks like the shaft is slipping on bearing ? funny noise coming out of motor until you hold that bearing then noise goes away ? I don't know if this is normal or if it makes any difference to the running of the motor. No its not normal but im sure we will work it out for you.Where did you get it from?
|
|
|
motor
Apr 19, 2012 20:37:44 GMT 10
Post by RJMyers on Apr 19, 2012 20:37:44 GMT 10
Someone at oversteer last friday night. It's only done 2 features I think. I could probably try and dimple into the end of the shaft and bearing. I'll leave it and see what you think. Can you pull them apart or are they a throw away ? Thanks Guru.
|
|
|
motor
Apr 19, 2012 21:03:01 GMT 10
Post by GURU on Apr 19, 2012 21:03:01 GMT 10
Throw away but we will sort it for you.
|
|
|
motor
Apr 20, 2012 13:10:49 GMT 10
Post by RJMyers on Apr 20, 2012 13:10:49 GMT 10
Hey Guru, somethings come up and wont be able to make it up there tonight, so I might have to get you to help me next week with my motor if that's ok. Sorry mate. Cheers Rick. ;D
|
|
|
motor
Apr 21, 2012 14:28:57 GMT 10
Post by GURU on Apr 21, 2012 14:28:57 GMT 10
Anytime mate .
|
|
|
motor
Jul 26, 2012 23:12:38 GMT 10
Post by RJMyers on Jul 26, 2012 23:12:38 GMT 10
Hey Guru, just a couple of questions on the esc for the sprint car, what esc do you recommend for the Tacon 3400kv brushless ? And do you know if there is an equivalent motor we can use for the tacon 3400kv ? Just building up another car. Cheers mate, Rick.
|
|
|
motor
Jul 27, 2012 20:43:04 GMT 10
Post by GURU on Jul 27, 2012 20:43:04 GMT 10
Hey Guru, just a couple of questions on the esc for the sprint car, what esc do you recommend for the Tacon 3400kv brushless ? And do you know if there is an equivalent motor we can use for the tacon 3400kv ? Just building up another car. Cheers mate, Rick. Hobby wing 18-25amp esc and no there are no equivalent motors to the tacon 34ookv,we have searched and searched for some with no results and may need to change our current specs.
|
|
|
motor
Jul 28, 2012 1:57:17 GMT 10
Post by RJMyers on Jul 28, 2012 1:57:17 GMT 10
Do you think we would have to go to another brand of motor or stick to the Tacon ? I've had a quick look at the tacon 3600kv and the 2900kv, they look like the closest but again what if the same thing happens to this tacon motor and becomes out of stock again. How did u guys originally come up with the tacon 3400kv ?
|
|
|
motor
Jul 28, 2012 22:00:13 GMT 10
Post by GURU on Jul 28, 2012 22:00:13 GMT 10
The 3400kv was the closest to stock we could find and as for the 2900kv we run that with a 20tooth pinion and it is great,but we believe the same thing will happen with stock as hobby partz have the sole rights to tacon and there service and communication are the worst in the industry. So at this stage ash and myself are looking for another brand.
|
|
|
motor
Jul 30, 2012 3:04:34 GMT 10
Post by RJMyers on Jul 30, 2012 3:04:34 GMT 10
No worries Guru ! Thanks mate.
|
|